1.Main content and applicable scope 

1.1 The standard herein (the "Standard") stipulates the quality specifications for ethenylbenzene delivered at DCE.

1.2 The Standard applies to standard products delivered under the ethenylbenzene futures contract of DCE.

2.Cited rules and standards

The provisions of the following documents are incorporated as the provisions of the Standard by citation. For those cited documents noted with dates, all of their following amendments (excluding corrections) and revised versions shall not be applied to the Standard; for those without noted dates, their latest versions shall be applied to the Standard.

GB/T 6678General Principles for Sampling Chemical Products

GB/T 6680General Rules for Sampling Liquid Chemical Products

GB/T 3915Ethenylbenzenefor Industrial Use

SH/T 0689-2000 Determination Method of Total Sulphur Content of Light Hydrocarbon, Engine Fuel and Other Oil Product (UV Fluorescence Method)

3.Terms and definitions

The terms and definitions herein shall be subject to the stipulations of the terms and definitions under GB/T 3915 and its cited rules.

4.Technical requirements

Table 1: Ethenylbenzene Delivery Quality Specifications

No.

Item

Target

    1.

Appearance

Clear and transparent, without mechanical impurities and free water

    2.

Purity (Mass Fraction)/%

99.8

    3.

Polymer/(mg/kg)

Loading in ≤6

Loading out≤10

    4.

Peroxide (Hydrogen Peroxide)/(mg/kg)

50

    5.

Total Aldehyde (Benzaldehyde)/(mg/kg)

100

    6.

Chroma (Pt-Co) / No.

10

    7.

Ethylbenzene(Mass Fraction) /%

0.08

    8.

Polymerization Inhibitor (TBC) /(mg/kg)

10-15

    9.

Sulphur Content/(mg/kg)

1

5. Testing methods and inspection rules

5.1 Sampling requirements shall be subject to the rules of GB/T 6678 and GB/T 6680.

5.2 Inspection of the quality specifications stipulated in Item 1-8 of Table 1 shall be subject to the rules of GB/T 3915, and inspection of the quality specification stipulated in Item 9 of Table 1 shall be subject to the rules of SH/T 0689-2000.

6. Storage

Ethenylbenzene shall be stored in refrigerated warehouse to prevent polymerization or deterioration.

7. Additional note

The Standard shall be subject to the interpretation of DCE.

Disclaimer: This English translation may be used for reference only. In cases there is any discrepancy between the English version and the original Chinese version, the original Chinese version shall prevail. Dalian Commodity Exchange may change or update this English translation without any prior notice and shall accept no responsibility or liability for damage or loss caused by any error, inaccuracy, misunderstanding, or change with regard to this English translation.

Address : No.129 Huizhan Road, Dalian 116023, China
Tel : 86-411-84808226
Email : inquiries@dce.com.cn Support IPv6
TOP